MIG/CO2 WELDING TORCH GUN YT-35CS Model Panasonic
- Sistem pendingin udara (air coolled system)
- terdapat dua ukuran panjang kabel 3 meter dan 4 meter.
- Dapat digunakan untuk type mesin las merk Panasonic.
- Aplikasi untuk mesin las kapasitas antara 200A, 350A dan 500A.
MIG/CO2 WELDING TORCH GUN Model BINZEL
- Sistem pendingin udara (air coolled system)
- terdapat dua ukuran panjang kabel 3 meter dan 4 meter.
- Dapat digunakan untuk type mesin las merk EURO.
- Aplikasi untuk mesin las kapasitas antara 200A, 350A dan 500A.
- Tersedia model MB15-AK, MB24-KD, MB25-AK, MB36-KD, MB501D.
PA500 Mini Wire Rope Hoist
- Our electric hoists meet the international standard in manufacturing and designing, which ensure using security. The motor has high output power, low heat production and longer life.
- Heat sink is made of cast aluminum, which extends working life.
- The lifting speed reaches 10m/min. The length of the wire rope is up to you, usually 12 meters long.
- Double hooks doubles the lifting weight
- Rated volt is 220v which is convenient to use in daily civilian field, industrial field and transportation.
REGULATOR CO2 MAG MIG With Heater
1. Forged brass body and zinc alloy bonnet for maximum strength
2. W/automatic temperature controller, will stop at 600 & will on at 500
3. Utilizing high pressure liquefied Carbon-Dioxide Gas
4. In terms of cartridge heater and pressure reducing mechanism, they can provide you the stabilized CO2
5. CO2 Regulator With Heater, 36V, 110V, 220V
REGULATOR CO2 HEATER W-199 VTech Crown
| For Gas | CO2, Ar, MAG |
| High pressure gauge | 280kg/4000 Psi |
| Inlet Pressure (P1) | Ar, MAG : 14.8 Mpa the following |
| CO2 : 12 Mpa the following | |
| Adjust the pressure (P2) | 0.35 Mpa |
| Flow range | 1 – 25L/min |
| Meter mode | Out Type |
| Flow Pressure | 0.35 Mpa |
| Intake thread | G5/8-14”-RH(F) |
| Outlet thread | M12-1.0 RH(Ø8.3) |
| Power | 190W, 210W |
| Voltage | 220V, 110V, 36V |
| Power line | 3 m |
| Weight | 2.1 kg |
REGULATOR CO2 HEATER FCR-50 VTech Crown
CARBON DIOXIDE REGULATOR
| For Gas | CO2, Ar, MAG |
| High pressure gauge | 2.5MPa |
| Inlet Pressure (P1) | Ar, MAG : 14.8 Mpa the following |
| CO2 : 12 Mpa the following | |
| Adjust the pressure (P2) | 0.35 Mpa |
| Flow range | 1 – 50L/min |
| Meter mode | Out Type |
| Flow Pressure | 0.35 Mpa |
| Intake thread | G5/8-14”-RH(F) |
| Outlet thread | M12-1.0RH |
| Power | 190W, 210W |
| Voltage | 220V, 110V, 36V |
| Power line | 3 m |
| Weight | 1.75 kg |
REGULATOR CO2 W-101 VTech Crown
CARBON DIOXIDE REGULATOR
| For Gas | CO2, Ar, MAG |
| High pressure gauge | 280kg/4000Psi |
| Inlet Pressure (P1) | Ar, MAG : 14.8 Mpa the following |
| CO2 : 12 Mpa the following | |
| Adjust the pressure (P2) | 0.35 Mpa |
| Flow range | 1 – 50L/min |
| Meter mode | Out Type |
| Flow Pressure | 0.35 Mpa |
| Intake thread | G5/8-14”-RH(F) |
| Weight | 1.1 kg |
REGULATOR CO2 W-101 VTech Crown
ARGON REGULATOR
| For Gas | Ar, MAG |
| High pressure gauge | 280kg/4000Psi |
| Inlet Pressure (P1) | Ar, MAG : 14.8 Mpa the following |
| CO2 : 12 Mpa the following | |
| Adjust the pressure (P2) | 0.35 Mpa |
| Flow range | 1 – 50L/min |
| Meter mode | Out Type |
| Flow Pressure | 0.35 Mpa |
| Intake thread | G5/8-14”-RH(F) |
| Weight | 1.1 kg |
